Tripp Lite par Eaton B127A-2A0-BH Récepteur HDMI sur Cat6 2 ports B127A-2A0-BH

Economisez $56.11
Tripp Lite by EatonSKU: B127A-2A0-BH

Prix:
Prix réduit$98.99 Prix normal$155.10
Stock:
Rupture de stock

Description

Features | HDMI Dual-Output Receiver Ideal for Digital Signage in Schools and Workplaces
This 4K receiver is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.

Extends a 4K A/V Transmission up to 230 ft....or Even Farther
The B127A-2A0-BH connects to a Tripp Lite B127A-Series transmitter, switch or splitter to extend 4K signals from an HDMI source to two HDMI displays up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling. By adding a Tripp Lite B127A-010-H signal repeater (sold separately) to the application, you can extend the signal up to 400 feet (121.9 meters) per display.

Supports Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color
The B127A-2A0-BH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with 7.1-channel surround sound audio via TOSLINK. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This receiver also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote displays.

Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers the B127A-2A0-BH over Cat6 cable. LEDs indicate when the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receiver where needed without worrying about finding a nearby AC outlet.

Plug-and-Play Operation for Quick Setup and Immediate Use
The receiver works right out of the package with no software required. Mounting hardware is included for installing it on a wall, pole or 19-inch rack. Connect the receiver to a transmitter, switch or splitter with user-supplied Cat6 cable (such as Tripp Lite's N202-Series). Connect to two 4K displays with user-supplied HDMI cables (such as Tripp Lite's P568- or P569-Series).

TAA-Compliant for GSA Schedule Purchases
The B127A-2A0-BH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Typical Applications

  • Extend video signals from one room to another using Cat6 cable, which can pass through conduit to meet building codes
  • Gain flexibility in where the receiver is placed, with the freedom to move and relocate it away from an AC outlet
  • Improve the line of sight for digital signage in a hotel, restaurant, theater, house of worship, trade show or other location

System Requirements

  • Source device with HDMI output (Blu-ray player, cable box, laptop)
  • Display device(s) with HDMI input (HDTV, projector, monitor)
  • Tripp Lite B127A-Series transmitter, switch or splitter
. .
  • Number of HDMI Outputs : 2
  • Maximum Operating Distance : 230 ft (70104 mm)
  • Number of Output Devices Supported : 2
  • Form Factor : Rack-mountable
  • Package Contents :
    • B127A-2A0-BH 2-Port HDMI over Cat6 Receiver
    • Mounting Hardware
    • Owner's Manual
  • Receiver Width : 4.53" (115.01 mm)
  • HDMI Out : Yes
  • Twisted Pair Cable Standard : Category 6
  • Manufacturer : Tripp Lite by Eaton
  • Product Model : B127A-2A0-BH
  • Receiver Weight (Approximate) : 453.6 g
  • Maximum Video Resolution : 3840 x 2160
  • TAA Compliant : Yes
  • Environmentally Friendly : Yes
  • Receiver Height : 1.06" (27 mm)
  • Product Color : Black
  • Receiver Depth : 2.46" (62.41 mm)
  • Limited Warranty : 1 Year
  • Network (RJ-45) : Yes
  • Product Type : Video Extender Receiver
  • Graphics Modes : 4K UHD
  • Media Type Supported : Twisted Pair
  • Country of Origin : Taiwan
  • Number of Network (RJ-45) Ports : 1
  • Connectivity Technology : Wired
  • Manufacturer Website Address : https://tripplite.eaton.com/
  • Color Family : Multicolor

Tu pourrais aussi aimer

Vu récemment