Système UPS Tripp Lite by Eaton SMART3000RMXLN avec SNMPWEBCARD SMART3000RMXLN préinstallé

Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB port, DB9 serial port and pre-installed WEBCARDLX network management interface card. The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS monitoring software is available via free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.

Key features

• NEMA L5-30P input; 8 NEMA 5-15/20R & 1 L5-30R outlets
• 2 independently switchable output load banks
• USB, RS232 & EPO ports, Pre-installed WEBCARDLX Network Interface Card
• Expandable runtime, Hot-swap batteries, 96% efficiency, Sine wave output
• Interactive LCD provides UPS status information and advanced configuration options
• 120V nominal output during brownouts to 83V and overvoltages to 145V
• 3kVA / 3000VA / 2880W line interactive 2U rack/tower UPS; 0.96 power factor
• In the box: SMART3000RMXLN UPS System with Pre-installed SNMPWEBCARD, PowerAlert Software CD, USB Cable, Serial Cable, EPO Cable, 4 Post Installation Kit, Instruction Manual
• Status Indicators : Network Link/Activity (Green): Flashes for network activity. Network Speed (Yellow): 10 Mbps (Flashing), 100 Mbps (On steady). LX Platform Interface Status: Normal Operation (Solid Green); Software Update (Alternating Green/Orange ~1/sec); Factory Reset (Alternating Green/Orange ~2/sec)

Specifications

• Receptacle Detail: 1 x NEMA L5-30R,8 x NEMA 5-15/20R
• Phase: Single Phase
• Product Series: SmartPro
• Form Factor: Rack/Tower
• Backup/Run Time (Full Load): 3 Minute
• Load Capacity: 3 kVA/2.88 kW
• Manufacturer: Tripp Lite by Eaton
• Product Model: SMART3000RMXLN
• Backup/Run Time (Half Load): 10 Minute
• Rack Height: 2U
• Receptacle Type: NEMA L5-30R,NEMA 5-15/20R
• Environmentally Friendly: Yes
• Input Voltage: 120 V AC
• Transfer Time: 5 ms
• Limited Warranty: 3 Year
• Typical Battery Recharge Time: 5 Hour
• Waveform Type: Pure Sine Wave
• Plug/Connector Type: NEMA L5-30P
• Product Type: Line-interactive UPS
• Replaceable Battery: Yes
• Hot Swappable: Yes
• Output Voltage: 110 V AC,115 V AC,120 V AC
• AVR: Yes
• Country of Origin: China
• DC System Voltage: 48 V DC
• Software Included: PowerAlert Software
• Network Management: SNMP Manageable
• Serial Port: Yes
• Maximum Operating Temperature: 104°F (40°C)
• Output Frequency: 60 Hz
• Storage Temperature: 5°F (-15°C) - 122°F (50°C)
• USB: Yes
• EMI/RFI Noise Filter: Yes
• Input Frequency: 60 Hz
• Surge Energy Rating: 570 J
• Alarm: UPS StartUp,Power Failure,Low Battery,Overload,UPS Fault,Remote Shutdown