8301 VoIP SIP paging adapter, balanced line level and scheduler for integrating existing and traditional paging solutions into a VoIP environment, PoE required.
Features
- IP paging adapter for public address (PA) and emergency notification.
- Isolated and balanced line output eliminates hum / noise to a traditional amplifier.
- Configurable line output supports amplifier input impedance between 600 Ohm and 10 kOhm.
- Eliminates the need for an FXS port or ATA.
- Simultaneously multicast to IP endpoints and provide line output audio to support both IP and analog infrastructure as one unified public address (PA) system.
- Wideband HD voice for high intelligibility speech.
- Customize WAV files for emergency notification / alerting and telephone loud ringing.
- Music input.
- Configuration via user friendly web interface or auto-provisioning.
- Secure SIP using TLS and SRTP.
- PoE (IEEE 802.3af).
- Ideal for integrating legacy analog public address (PA) systems in education, retail, manufacturing, transport terminals (i.e., airports, bus and rail stations), healthcare, government and other commercial environments.
Specifications
| Power |
|
| Power Source |
PoE (IEEE 802.3af Class 0) 48 V, 15.4 W |
| Max Power (at Device) |
4 W |
| Idle Power |
2 W |
| SIP |
|
| SIP Extensions |
50 Page (Capable of hands-free talkback when appropriate speaker & microphone connected) |
|
10 Emergency Alert |
|
10 Ring |
| SIP Signalling/Transport Protocols |
UDP, TCP, RTP |
| Security |
TLS, SRTP, Mutual Authentication |
| Audio Codecs |
G.711 u-law, G.711 A-law, G.722 Wideband |
| Multicast |
|
| RTP Multicast |
Send and Receive 50 Zones |
| Audio Codecs |
G.711 u-law, G.711 A-law, G.722 Wideband, Opus Fullband |
| Third-Party Compatibility |
|
|
RESTful API |
|
Poly Group Page |
|
Singlewire InformaCast (additional license required) |
|
Syn-Apps Revolution |
|
Microsoft Teams |
| Configuration & Provisioning |
|
| Configuration |
Web interface or provisioning server |
| Web Interface |
HTTP, HTTPS |
| Provisioning |
TFTP, FTP, HTTP, HTTPS |
|
DHCP Options 66, 150, 160 |
|
Reboot via SIP ‘check-sync’ |
| ZTP |
Supported |
| Supervision |
Compatible with Algo Device Management Platform (ADMP), Algo 8300 IP Controller, any third-party SNMP monitoring software, and RTCP |
| Networking |
|
| Networking |
IPv4, IPv6, DHCP, VLAN, MDNS |
| Link Layer |
LLDP, CDP |
| Security |
IEEE 802.1X |
| QoS |
DSCP |
| NAT |
STUN, TURN, CRLF Keep Alive, SIP Outbound |
| Address Resolution |
DNS, SRV Record |
| Redundancy |
Secondary and tertiary SIP server |
| Time |
NTP Server (up to four) |
| Audio |
|
| Microphone |
Connection available for external microphone |
| Audio Memory & Format |
1 GByte audio storage for WAV or MP3 files |
| Audio Controls |
Volume, AGC, Latency, LF Cut |
| Anti-Feedback Delay |
Cache to memory and release |
| Audio Delay |
Programmable 1-1000 ms synchronization delay |
| Input/Output |
|
| Relay Input |
Normally open or normally closed dry contact with supervision. Compatible with Algo 1202 Call Button, 1203 Call Switch, 1204 Volume Control, 1205 Audio Interface, or EOL resistor termination |
| Relay Output |
Max 30 V 50 mA (normally open) |
| Aux In |
3.5 mm jack for analog line level input for music input. Non-isolated. |
| Aux Out |
3.5 mm jack for analog line level input for compatible PC speakers or headset. Non-isolated. |
| Line In XLR-Mini |
Balanced and isolated audio (page or music) input can be configured for pass-through to Line Out (when paging is idle), or for broadcast via multicast. |
| Line Out XLR-Mini |
Balanced and isolated audio output to external amplifier. Locking mini-XLR female to standard XLR male cable available. output level defined using web interface. |
| Terminal Block Line In |
Balanced and isolated wire pair input parallel to mini-XLR line in (polarity independent). |
| Terminal Block Line Out |
Balanced and isolated wire pair output to external amplifier. Parallel to mini-XLR line out (polarity independent). |
| Relay Input Current Draw Detection Thresholds |
Active |
Idle |
Tamper |
| Normally Open |
> 4 mA |
< 4 mA |
N/A |
| Normally Open with Supervision |
> 20 mA |
4 - 20 mA |
< 4 mA |
| Normally Closed |
< 4 mA |
> 4 mA |
N/A |
| Normally Closed with Supervision |
4 - 20 mA |
> 20 mA |
< 4 mA |
| Nominal 12 V source, current limited to 40 mA |
| Typical supervision resistor value = 1 kOhm |
| Environmental & Mechanical |
|
| Environmental |
0 to + 40° C (32 to 104° F); 10-95% RH non-condensing. Dry indoor locations only. |
| Dimensions (Product) |
6.75” x 4.3” x 1.18” (17.2 cm x 10.9 cm x 3.0 cm) |
| Weight (Product) |
0.9 lbs (0.4 kg) |
| Weight (shipping) |
1.5 lbs (0.7 kg) |
| Mounting |
Snap mounting bracket included |
| Compliance |
| RoHS, CE, FCC Class A, CISPR 22 Class A, CISPR 24, CSA/UL (USA & Canada), EN60950 |
