The PoE 8186-IC SIP horn is an outdoor-rated IP speaker for voice paging, emergency alerting, and loud ringing applications. This IP speaker is also a fully compliant 3rd party SIP endpoint. As a result, the 8186 IP horn speaker is compatible with most hosted / cloud and premise-based VoIP telephone systems.
- Public address (PA) IP speaker.
- Secure SIP using TLS and SRTP.
- Multicast scalable.
- Wideband HD voice for high intelligibility speech.
- Dynamic volume control responsive to ambient noise levels.
- Talkback capable speaker.
- IPX6 and outdoor rated.
-
- Customize WAV files for emergency notification / alerting and telephone loud ringing.
- Configuration via user friendly web interface or auto-provisioning.
- PoE (IEEE 802.3af).
- Ideal for a warehouse, factory / utility / plant, garage, machine shop, bus / train terminal, school gym, outdoor yard, car lot, etc.
Specifications
Power |
|
POWER SOURCE |
PoE (IEEE 802.3af Class 0) 48 V, 15.4 W |
MAX POWER (AT DEVICE) |
12.95 W |
IDLE POWER |
2 W |
SIP |
|
SIP EXTENSIONS |
50 Page (Capable of hands-free talkback) |
|
10 Emergency Alert |
|
10 Ring |
SIP SIGNALLING/TRANSPORT PROTOCOLS |
UDP, TCP, RTP |
SECURITY |
TLS, SRTP, Mutual Authentication |
AUDIO CODECS |
G.711 u-law, G.711 A-law, G.722 Wideband |
Multicast |
|
RTP MULTICAST |
Send and Receive 50 Zones |
AUDIO CODECS |
G.711 u-law, G.711 A-law, G.722 Wideband, Opus Fullband |
Third-Party Compatibility |
|
|
RESTful API |
|
Poly Group Page™ |
|
Singlewire InformaCast® (additional license required) |
|
Intrado Revolution® |
|
Microsoft Teams® |
Configuration & Provisioning |
|
CONFIGURATION |
Web interface or provisioning server |
WEB INTERFACE |
HTTP, HTTPS |
PROVISIONING |
TFTP, FTP, HTTP, HTTPS |
|
DHCP Options 66, 150, 160 |
|
Reboot via SIP ‘check-sync’ |
ZTP |
Supported |
SUPERVISION |
Compatible with Algo Device Management Platform (ADMP), Algo 8300 IP Controller, any third-party SNMP monitoring software, and RTCP |
Networking |
|
NETWORKING |
IPv4, IPv6, DHCP, VLAN, MDNS |
LINK LAYER |
LLDP, CDP |
SECURITY |
IEEE 802.1X |
QOS |
DSCP |
NAT |
STUN, TURN, CRLF Keep Alive, SIP Outbound |
ADDRESS RESOLUTION |
DNS, SRV Record |
REDUNDANCY |
Secondary and tertiary SIP server |
TIME |
NTP Server (up to four) |
Audio |
|
SPL |
116 dBA at 1 m (1 kHz sine wave) |
MICROPHONE |
Omnidirectional - talkback and ambient noise monitoring |
AUDIO MEMORY & FORMAT |
1 GB audio storage for WAV or MP3 files |
AUDIO CONTROLS |
Volume, AGC, Latency, LF Cut |
ANTI-FEEDBACK DELAY |
Cache to memory release |
AUDIO DELAY |
Programmable 1-1000ms synchronization delay (in multicast receiver mode) |
MAX AUDIO POWER |
8 W |
Input / Output |
|
RELAY INPUT |
Normally open or normally closed dry contact with supervision. Algo 1202 Call Button, 1203 Call Switch, 1204 Volume Control, EOL resistor termination |
RELAY OUTPUT |
Max 30 V 50 mA (normally open) |
RESET TERMINAL |
Normally open. Only available during bootup. |
Nominal 12V source, current limited to 40mA. Typical supervision resistor value = 1k ohm
Relay Input Current Draw Detection Thresholds |
Active |
Idle |
Tamper |
NORMALLY OPEN |
> 4 mA |
< 4 mA |
N/A |
NORMALLY OPEN WITH SUPERVISION |
> 20 mA |
4 - 20 mA |
< 4 mA |
NORMALLY CLOSED |
< 4 mA |
> 4 mA |
N/A |
NORMALLY CLOSED WITH SUPERVISION |
4 - 20 mA |
> 20 mA |
< 4 mA |
Environmental & Mechanical |
|
ENVIRONMENTAL |
-40 to +50° C (-40 to +122° F) |
|
IPX6 rating - Suitable for outdoor and wet environments when properly installed. |
DIMENSIONS (PRODUCT) |
11” x 6.6” x 10.5” (28 cm x 16.8 cm x 26.7 cm) |
WEIGHT (PRODUCT) |
5.0 lbs (2.3 kg) |
WEIGHT (SHIPPING) |
6.4 lbs (2.9 kg) |
MOUNTING |
Wall, ceiling, or double gang electrical box |
AIM ADJUSTMENT |
Three axis |
Compliance |
RoHS, CE, FCC Class A, CISPR 22 Class A, CISPR 24, CSA/UL (USA & Canada), EN60950 |