Algo 8188‐IC InformaCast Visual Alerter (8188‐IC)
Wideband IP Ceiling Speaker for Voice Paging, Emergency Alerting & Playing Music – PoE
The 8188 IP Ceiling Speaker is a SIP speaker used in a drop ceiling for voice paging, emergency, and playing music. The speaker is a fully compliant 3rd party SIP endpoint. As a result, this IP ceiling speaker is compatible with most hosted / cloud and premise-based VoIP telephone systems.
Wideband IP Speaker
The 8180 SIP Audio Alerter supports the Wideband G.722 HD voice codec. Consequently, there is high intelligibility and clarity of audio from the speaker for IP paging of voice announcements and emergency notification. The result is better STI-PA scores, which is important in meeting standards such as NFPA 72 and NEMA SB-40 for Emergency Communication in Education.
Benefits of the PoE Algo SIP Audio Alerter Speaker
- Excellent Wideband audio clarity and intelligibility.
- Network managed and supervised SIP and multicast endpoint.
- Fully zone configurable via a web interface. Multicast zones are not dependent on wiring to speaker.
- PoE (IEEE 802.3af) eliminates need for local power supply, and simplifies wiring infrastructure and management.
- Eliminates narrowband FXS port or ATA.
- Multi functional IP speaker for voice paging, emergency notification and ring alerting. Easily integrate with the Algo 8301 SIP Paging Adapter & Scheduler for automatically playing tones and/or announcements for scheduled events.
As a Singlewire Solutions Partner, Algo products have been certified for compatibility and interoperability. Deploy Algo’s suite of Singlewire certified IP speakers, paging adapters, and strobe lights for your voice paging and alerting requirements within your Singlewire ecosystem.
Specifications
| Power |
|
| POWER SOURCE |
PoE (IEEE 802.3af Class 0) 48 V, 15.4 W |
| MAX POWER (AT DEVICE) |
12.95 W |
| IDLE POWER |
2.5 W |
| SIP |
|
| SIP EXTENSIONS |
50 Page (Capable of hands-free talkback) |
| |
10 Emergency Alert |
| |
10 Ring |
| SIP SIGNALLING/TRANSPORT PROTOCOLS |
UDP, TCP, RTP |
| SECURITY |
TLS, SRTP, Mutual Authentication |
| AUDIO CODECS |
G.711 u-law, G.711 A-law, G.722 Wideband |
| Multicast |
|
| RTP MULTICAST |
Send and Receive 50 Zones |
| AUDIO CODECS |
G.711 u-law, G.711 A-law, G.722 Wideband, Opus Fullband |
| Third-Party Compatibility |
|
| |
RESTful API |
| |
Poly Group Page™ |
| |
Singlewire InformaCast® (additional license required) |
| |
Intrado Revolution® |
| |
Microsoft Teams® |
| Configuration & Provisioning |
|
| CONFIGURATION |
Web interface or provisioning server |
| WEB INTERFACE |
HTTP, HTTPS |
| PROVISIONING |
TFTP, FTP, HTTP, HTTPS |
| |
DHCP Options 66, 150, 160 |
| |
Reboot via SIP ‘check-sync’ |
| ZTP |
Supported |
| SUPERVISION |
Compatible with Algo Device Management Platform (ADMP), Algo 8300 IP Controller, any third party SNMP monitoring software, and RTCP |
| Networking |
|
| NETWORKING |
IPv4, IPv6, DHCP, VLAN, MDNS |
| LINK LAYER |
LLDP, CDP |
| SECURITY |
IEEE 802.1X |
| QOS |
DSCP |
| NAT |
STUN, TURN, CRLF Keep Alive, SIP Outbound |
| ADDRESS RESOLUTION |
DNS, SRV Record |
| REDUNDANCY |
Secondary and tertiary SIP server |
| TIME |
NTP Server (up to four) |
| Audio |
|
| SPL |
106 dBA at 1 m (120 dBA with 1186 horn) |
| MICROPHONE |
Omnidirectional – talkback and ambient noise monitoring |
| AUDIO MEMORY & FORMAT |
1GByte audio storage for WAV or MP3 files |
| AUDIO CONTROLS |
Volume, AGC, Latency, LF Cut |
| ANTI-FEEDBACK DELAY |
Cache to memory and release |
| AUDIO DELAY |
Programmable 1-1000ms synchronization delay (in multicast receiver mode) |
| DRIVER |
3.0" (7.7 cm) UV Stabilized |
| DRIVER RESPONSE |
150-13,000 Hz (-10 dB) |
| MAX AUDIO POWER |
8 W |
| AUDIO OUTPUTS |
Speaker output 8Ohm 8W when internal speaker disabled Audio Output nominal 0dBm into 600Ohm load |
| Input/Output |
|
| RELAY INPUT* |
Normally open or normally closed dry contact with supervision. Compatible with Algo 1202 Call Button, 1203 Call Switch, 1204 Volume Control, or EOL resistor termination |
| RELAY OUTPUT* |
Max 30 V 50 mA (normally open) |
| SPEAKER OUTPUT |
To external 8Ohm speaker. Note that if an external speaker is connected, the internal one is deactivated. |
| AUDIO OUTPUT |
Line output level available for optional connection to external amplifier. |
Note: The Relay Input and Relay Output features share the same pins on the terminal block, which must be configured as either an input or output. Thus, only one of these two functions can be used per device (not both).
| Relay Input Current Draw Detection Thresholds |
Active |
Idle |
Tamper |
| NORMALLY OPEN |
> 4 mA |
< 4 mA |
N/A |
| NORMALLY OPEN WITH SUPERVISION |
> 20 mA |
4 - 20 mA |
< 4 mA |
| NORMALLY CLOSED |
< 4 mA |
> 4 mA |
N/A |
| NORMALLY CLOSED WITH SUPERVISION |
4 - 20 mA |
> 20 mA |
< 4 mA |
| NOMINAL 12 V SOURCE, CURRENT LIMITED TO 40 MA |
| Typical supervision resistor value = 1 kOhm |
| Environmental & Mechanical |
|
| ENVIRONMENTAL |
0 to + 40 °C (32 to 104 °F); 10-95% RHnon-condensing. Dry indoor locations only. |
| DIMENSIONS (PRODUCT) |
7″ x 4″ x 2.6″ (17.8cm x 10.2cm x 6.5cm) |
| WEIGHT (PRODUCT) |
1.0 lbs (0.5 kg) |
| WEIGHT (SHIPPING) |
1.6 lbs (0.7 kg) |
| MOUNTING |
Wall mount snap bracket included |
| Compliance |
|---|
| RoHS, CE, FCC Class A, CISPR 22 Class A, CISPR 24, CSA/UL (USA & Canada), EN60950 |
